-No.0032 Acrylic paint for river bottom Fukas Green Hugh 20ml
-P Water Expression Material Gross Polymer Medium 50ml
-G1 Wave Expression Material Gel Medium 50ml
-7 Wave front expression material blended fiber 50ml
-No.521 Kawaishi Maru Small / Small Gray 30ml
-No.522 Kawaishi Maru Small Gray 10ml
-No.525 Koiwa Gray 10ml
-No.526 Nakaiwa Gray 10ml
-Create riverbed and ground with R color plaster No.205 natural (sold separately). It dries and hardens in about one day. After drying, paint the attached acrylic paint on the riverbed and color. (Dry in 2-3 hours)
-Create the topography of the riverbank and dike with scenery sand No.153 cream (sold separately), etc., and after placing, place the river stones in order from larger stones. The stone in contact with the scenery sand dries and sticks in about half a day. To add more stones, use a solution in which a small amount (0.5%) of a neutral detergent is added to a woodwork bond (3-4 times) diluted with water. Secure with a dropper.
-After drying (approximately half a day), apply the attached water expression material and gloss polymer medium to the brush and apply it to a thickness of 1 to 2 mm. After applying, keep the water level and dry. It dries and clears in about 1 day. If cracking occurs, apply it so that cracks are filled again after drying completely.
-Paint a wave expression material and gel medium with a brush to express the flow of the river and the waves. This also becomes transparent after drying (about half a day).
-Paint the crest / blended fiber over the wave with a small brush. Splash of a crest and white waves can be expressed. (Dry in 3-4 hours)
-You can create a water surface of about 30 x 30cm with the set of water expression materials (gross polymer medium).
( This is a machine translation. Please allow for possible misinterpretations in the text. )