This item is limited to 50 per household.
-Equipped with an indoor light (flickering greatly reduced) function that can be popularly charged. (Popondetta/TOMIX narrow product type support)
-We will add a white color located between the existing bluish white and yellowish white.
-Specifications other than color are the same as existing products.
*14 LEDs installed
-It is compatible with TOMIX and Microace vehicles, but some vehicles cannot be installed.
-Cannot be installed on tram/car interior lights.
[how to use]
-Attach the attached spring to the board and attach it to the vehicle body.
-Attach the adapter to the part that hits the vehicle body column.
*The adapter is used only for vehicles other than those made by Popondetta.
*Please cut the board at a place where it can be cut according to the length of the vehicle.
[About switches]
-The strength of the light source can be switched with the switch on the board
-Mode S: It is a normal mode considering the illuminance of the actual vehicle. Since the amount of electricity stored is large, the effect of reducing flicker is great.
-Mode H: High illumination mode with priority on brightness. Since the amount of electricity stored is small, the effect of reducing flicker is reduced.
*Initial setting is Mode S setting.
[Note]
-Please use this product at 12V or less.
-The function may not be exhibited depending on the usage environment.
-It is an indoor light for N gauge, so any usage other than this purpose is strictly prohibited.
[Package size]
-7 pieces: Approx. 27 mm x 183 mm x 17 mm
*Specifications are as of the end of April 2020. Specifications may change when commercialized.
( This is a machine translation. Please allow for possible misinterpretations in the text. )