This item is limited to 50 per household.
-Equipped with a highly acclaimed indoor light (significantly reduced flickering) function. (For KATO products)
-We will add a white color located between the existing bluish white and yellowish white.
-Specifications other than color are the same as existing products.
*14 LEDs installed
[how to use ]
-Attach the supplied current collector to the vehicle body.
-Attach the interior light body to the vehicle body so that it touches the current collector.
*Please cut the board at a place where it can be cut according to the length of the vehicle.
[About switches]
-The strength of the light source can be switched with the switch on the board
-Mode S: It is a normal mode considering the illuminance of the actual vehicle.
-Since the amount of electricity stored is large, the effect of reducing flicker is great.
-Mode H: High illumination mode with priority on brightness
-Since the amount of electricity stored is small, the effect of reducing flicker becomes small.
*Initial setting is Mode S setting.
[Note]
-Please use this product at 12V or less.
-The function may not be exhibited depending on the usage environment.
-Interior light for N gauge. Usage other than this purpose is strictly prohibited.
[Package size]
-1 bottle: approx. 19 mm x approx. 170 mm x approx. 15 mm
-7 pieces: about 27 mm × about 170 mm × about 17 mm
*Some vehicles cannot be installed.
*Cannot be installed on tram/car interior lights.
( This is a machine translation. Please allow for possible misinterpretations in the text. )