Product Description

-Reproduce the appearance of shooting exercises and viewing marches! 87AW with members is now available as a spot product

--The Type 87 self-propelled anti-aircraft gun was developed in 1982 for the renewal of the M42 Duster.
――Initially, it was planned to develop based on the body of the Type 61 tank, but due to size problems, it was designed and developed based on the Type 74 tank, and it was formalized in 1987.
――The only stand-alone anti-aircraft gun of the Ground Self-Defense Force that can perform a series of anti-aircraft combat from searching for a target, tracking, and shooting. ..
--The main gun is equipped with two Ericon KDA 35mm cannons, the rear part of the turret is equipped with a search radar / following radar, and as a backup, a laser rangefinder, infrared night vision device, and TV camera are also provided. In addition, by using armor-piercing shells prepared separately for anti-aircraft shooting, it has versatility that can be used for anti-armor combat.
――The body has a silhouette similar to that of another body due to the increased volume compared to the Type 74 tank.
--52 cars have been procured and are currently deployed in the 7th Antiaircraft Artillery Regiment (Higashi Chitose), the 2nd Antiaircraft Artillery Battalion (Asahikawa), Kosha School (Chiba) and Weapons School (Tsuchiura). I am.
――It is one of the main equipment that you can see shooting live bullets at the Fuji Firepower Review held every summer.

――This product is a 1/72 military series No. 987 self-propelled anti-aircraft gun (2 cars included) with member parts attached.

--Type 87 self-propelled anti-aircraft gun that appeared in the 1/72 military series with a completely new mold in 2018

[Easy to make and precise reproducibility]
――The number of parts is 109, which is the minimum, but the parts where reproducibility should be emphasized are separate parts.
--The turret is integrally molded using a slide mold. Welding marks and non-slip parts in the real thing are accurately expressed on the upper side and bottom of the car body.

[Completely new design that accurately three-dimensionalizes the actual vehicle]
――The taper angle of the 35mm barrel and the position of the maximum prominent part are incorporated in 1/72, though they are fine, and made into plastic parts.
――You can select the early type triple type and the late type quadruple type for firing (smoke bullet launcher).
-The track is reproduced with a rubber pad that can be seen in viewing ceremonies.
--Laser rangefinders, infrared night vision devices, headlights and periscopes are made into transparent parts.
-The design that tends to be omitted such as the pilot's emergency escape exit and welding marks is reproduced on the bottom of the car body.
――The tow wire at the rear of the body is a separate part in consideration of painting.

[Attached decals are maniac content]
--Basic notations such as vehicle number, affiliation notation, and unit mark cover all units such as [2 Kotoku], [7 Kotoku], [Kosha School], and [Weapon School].
――In addition, the unique two-digit number of Kosha School and the [Caution for overtaking] notation when driving on public roads that make you want to make a C route diorama of Chitose are recorded.
――At each garrison, vehicles with the corps flag raised during the inspection march and vehicles with distinctive markings in the past are recorded evenly for vehicles equipped with 3/4 trains.

[Attached member parts are 3 to minutes (3 or more can be manufactured by selecting the presence or absence of a belt)]
-Parts include poses such as sitting, standing, shooting, salute, and flagman.
-You can change the pose depending on the combination by dividing it into 4 pieces [head, right arm, left arm, upper and lower body].
――There are 3 types of heads, and 2 parts each are recorded in 1 runner. You can choose from armor caps, goggles, armor caps, and type 88 helmets.
-The armor cap reproduces the state of wearing the headset with delicate modeling.
――The chest to lower body parts have sitting and standing postures, and each of the 6 types is recorded in 1 runner.
-There are types such as the presence or absence of belts and suspenders, the standing position that bends forward when holding the in-vehicle machine gun, and the upright position when salute.
――The right arm contains 19 different poses, including the flag stick.
――The style of holding the hatch area and the in-vehicle machine gun, salute, pointing, arm and flag stick of the censored flag bearer, etc. are recorded.
――The appearance of wrinkles in the combat uniform and the shaping of the fingers are finely finished.
--The left arm contains 13 different poses.
-Records the style of grasping around the hatch and the in-vehicle machine gun, and the pose to grasp when sitting in the vehicle.


Item Size/Weight : 24 x 15.2 x 7.9 cm / 348g

Product Specifications

Item series

1/72 ML

Country

Japan

Item code

723495

JAN code

4968728723495

Purchase Information