Product Description

- The Koppel B tank is based on the old design 40HP class B tank steam locomotive with a gauge of 1067 mm. The same type of locomotive was in service with the Arita Railway, Miyazaki Transportation Railway Department, Ise Railway, and the Ministry of Railways.
- The Wa 10343 type covered wagon is a 7-ton wooden covered wagon manufactured for the government railway during the Meiji period. The car length and other specifications are the same as the later 10-ton covered wagons, and about 2,900 were produced, mainly at private and public factories.
- The Wab covered brake van is a model of a modified covered car body, and the arrangement of wooden pillars and wooden doors is different from that of a normal brake van. The chassis of the Wa and Wab are sculptures of the frame only.
*Some parts require installation.
*Coupler selection type
*With inlay for Wa・Wafu
*Includes a screw-type coupler (for one motor car) and a screw-type coupler and chain coupler (for two freight cars)

[Product Guide]
- This special set includes a Koppel B tank (straight chimney, 5mm wheel diameter, body color: black/motorized), one covered wagon Wa10343 type, and one covered brake van WaB.
- It is based on the image of local private railways before the introduction of automatic couplers.

- Due to the limited edition specifications, the details may differ from the regular product.
- Wooden covered wagon Wa10343 type has no release lever carving and no pillars extending to the bottom of the car body. Chassis carving is only on the frame.
- The wooden brake van WAB is a model of a modified covered wagon body, and the arrangement of wooden pillars and wooden doors differs from that of a normal brake van, and the chassis carvings are only on the frame.

- Includes inlays for Wa1 and WaF, and [2 screw-type couplers (for powered cars) for 1 car][2 screw-type couplers and chain couplers (for freight cars) for 2 cars (2 each)].
- Screw-type couplers allow trains to run in formation.

[set content]
- Koppel B Tank (Straight chimney, Wheel diameter 5mm, Body color: Black/Powered)
- Covered wagon Wa10343 type (wooden pillars, wooden doors, no pillar bottoms, no release levers)
- Brake van with lid (wooden pillars, wooden door, no pillar bottom, no release lever)
- Screw-type coupler (for powered cars) for 1 car
- Screw-type coupler/link coupler (for freight cars/passenger cars) for 2 cars

[KOPPEL B TANK PRODUCT SPECIFICATIONS]
- Straight chimney, wheel diameter 5mm, body color: black, motorized
- Pre-painted finished product (simple rod specifications)
- Body length: Approx. 37.5mm (excluding coupler)
- Body width: Approx. 18mm
- Vehicle height: approx. 25mm
- Wheel diameter: 5mm
- accessories
・Coupler installation options: Arnold coupler x 2, drawbar hook x 2
・Buffer (optional mounting) x 4
・Dummy knuckle x 1
・Drawbar x 1
・Plastic steam pipe (installable) x 1

[Product specifications for the Wa10343 type boxcar]
- Wooden pillars, wooden doors, no pillar bottoms, no release levers
- Pre-painted finished product
- Body length: Approx. 39mm (excluding coupler and buffer)
- Body width: approx. 17mm Body height: approx. 22mm
- Wheel diameter: 5.6mm Body: Plastic
- accessories
・Coupler installation options: Arnold coupler x 2, drawbar hook x 2
・Buffer (optional mounting) x 5
・Dummy knuckle x 1
・Drawbar x 2
・1 x inlay

[Wabu product specifications]
- Pre-painted finished product
- Body length: Approx. 42mm (excluding coupler and buffer)
- Body width: approx. 17mm Body height: approx. 22mm
- Wheel diameter: 5.6mm Body: Plastic
- accessories
・Coupler installation options: Arnold coupler x 2, drawbar hook x 2
・Buffer (optional mounting) x 5
・Dummy knuckle x 1
・Drawbar x 2
・1 x inlay

*Some parts included with each vehicle require installation.
*Each image shows the parts installed.
*Specifications may differ from the actual product.


Item Size/Weight : 14.9 x 10.1 x 3.7 cm / 72g

Product Specifications

Item series

Locomotive|Freight Car

Region

Others within Japan

Item code

91012

JAN code

4957265910123

Purchase Information