Product Description
A special edition of the Imperial Japanese Navy Series [Japanese Navy Battleship Yamato] that comes with etched parts and wooden deck stickers!
The product is a full hull model that can reproduce the bottom of the ship, and comes with a pedestal that can be displayed after completion.
The product is based on the appearance during Operation Ten-Ichi-Go in 1945.
[Hull]
- The hull is made up of a single unit consisting of the starboard and port sides and the upper wooden deck.
- The portholes, a characteristic of the later stages of the war, are depicted blocked off with convex molding.
- The wooden deck is expressed with raised molding.
- The parts, including the hull and bottom plate, are molded in gray.
- The bridge and chimney are made by joining the left and right sides together.
- The lower part of the hull is made up of one integrally molded part, with the screw and rudder being separate parts.
[Equipment]
- Equipment with enhanced anti-aircraft armament at the final stage
- The main gun barrel and canvas are one unit, and the elevation and depression angles are fixed in the locked position.
- Only two secondary guns were removed during the remodeling, and the turret and barrel are integrated into one part.
- The 25mm triple machine gun (without shield) comes with a choice of conventional molded parts or precisely sculpted molded parts developed in 2018.
- The barrel elevation angle of the shielded 25mm triple machine gun can be selected from two positions: high elevation angle and locked position.
- The machine gun mounts installed on the main gun canopy and at the stern are reproduced using special parts.
- Two types of carrier-based floatplanes are included: the Zero observation plane and the Zero (three-seat) floatplane.
- The aircraft is molded in gray for ease of use.
[Decal]
- Includes three types of decals, one of each.
- Decals containing naval ensigns, the Japanese flag, and carrier-based aircraft markings.
- Decals include draft markings, the chrysanthemum crest on the bow, and the ship's name on the stern (in two colors: gold and solid in warship colors).
- Decals included to easily represent the walking area on the aircraft work deck at the rear of the ship.
[Etching parts]
- Includes etched parts that can express fine details that are difficult to reproduce with injection parts.
- The etched parts are made of brass and come in two types, one of each.
- Etched parts include ladders, ladders, compass, signal light poles, compass bridge window frames, and No. 21 radar.
Etching size: Large etching (approx.): 96 x 180 mm, Small etching (approx.): 38 x 180 mm
[Wooden deck sticker]
- The wooden deck sticker has a surface processed with a laser cutter to reproduce an irregular wood grain pattern.
- It is cut to fit the deck parts and consists of two separate pieces, front and back.
- The pattern of a wooden deck with fine lines, which is difficult to express with paint, can be easily and realistically reproduced.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 41 x 14.7 x 6.3 cm / 481g
Product Specifications
- Item code
- 452449
- JAN code
- 4968728452449
Purchase Information
* Hurry! This item is almost sold out!
This item is limited to 1 per household.