Product Description
[Basic Specifications]
It features an adhesive assembly system and boasts an intricate, detailed design that prioritizes sculptural detail.
The molded color is primarily gray, and the model is designed to be assembled while enjoying the painting process.
The PLUS version differs from the STD version in that some parts are made of clear plastic for a more realistic look.
The product is modeled after the tank was refitted in September 1944, when its 14cm single gun was replaced with a 12.7cm twin anti-aircraft gun.
→The hull with the forward torpedo tubes removed and a crew waiting room installed.
→The torpedo tubes were replaced with quadruple launchers.
→The ship is equipped with a Type 21 radar on the bridge and Type 22 and Type 13 radars on the aft mast.
→ Equipped with a 10-meter cargo ship.
[Structure, Specifications, and Features]
- hull
- Parts configuration with a left and right integrated structure
→External electrical wiring is not installed; the shape is based on the design during sea trials after the refit.
→The appearance after the removal of the forward torpedo tubes and the installation of a troop waiting room.
→The portholes were closed off based on lessons learned from the war, resulting in a design that represents the minimal number of portholes remaining.
- The hull bottom is designed to fit into the inside of the hull sides, and the area below the waterline is not reproduced.
- The shelter section is a single integrated part created using a slide mold.
[Basic Specifications]
It features an adhesive assembly system and boasts an intricate, detailed design that prioritizes sculptural detail.
The molded color is primarily gray, and the model is designed to be assembled while enjoying the painting process.
- The PLUS version differs from the STD version in that some parts are clear parts designed for greater realism.
The product is modeled after the tank was refitted in September 1944, when its 14cm single gun was replaced with a 12.7cm twin anti-aircraft gun.
→The hull with the forward torpedo tubes removed and a crew waiting room installed.
→The torpedo tubes were replaced with quadruple launchers.
→The ship is equipped with a Type 21 radar on the bridge and Type 22 and Type 13 radars on the aft mast.
→ Equipped with a 10-meter cargo ship.
[Structure, Specifications, and Features]
- hull
- Parts configuration with a left and right integrated structure
→External electrical wiring is not installed; the shape is based on the design during sea trials after the refit.
→The appearance after the removal of the forward torpedo tubes and the installation of a troop waiting room.
→The portholes were closed off based on lessons learned from the war, resulting in a design that represents the minimal number of portholes remaining.
- The hull bottom is designed to fit into the inside of the hull sides, and the area below the waterline is not reproduced.
- The shelter section is a single integrated part created using a slide mold.
- Equipment
- The gangway is a separate part, allowing for the reproduction of the ship's appearance when at anchor.
- The rear mast consists of separate parts for the main mast, support masts, and cross trees.
The searchlight parts are molded in gray.
- The Type 13 radar can be optionally installed (installation requires modification of the boat landing pole).
- The stern signal light is provided as a separate part.
- Decals
- One sheet of each type of decal is included.
[Contents] 12 runners, 1 instruction manual, 1 decal sheet
The finished size is approximately 232 x 20 x 43 mm (length x width x height).
[Design/Mold Development Timing Information]
2012
★The differences between the Standard (STD) version and the Plus (PLUS) version are as follows:
- Molded color of searchlights/signal lights
- Addition of a binocular telescope (Specifications for the PLUS version are described below)
- Replaced/included with a 2-piece type 25mm machine gun
- Replacement of Type 21 radar, Type 13 radar, and Type 22 radar.
- Replacement of the A1 type high-angle gun
- Replacement of 11-meter motorboats
- Replacement of 9-meter cutter
- Addition of boat racks
- Replacement of the chrysanthemum crest
- Replacement of navigation lights
- Addition of decals for the ship's name, etc., on the stern.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 41.5 x 15.6 x 6.6 cm / 234g
Product Specifications
- Item code
- 434131
- JAN code
- 4968728434131
Purchase Information
* Hurry! This item is almost sold out!
This item is limited to 2 per household.