[Limited Edition] J.N.R. Type ED18 (#1) (Pre-colored Completed) (Model Train) - HobbySearch Model Train N Store

This item is limited to 12 per household.

*Package is damaged but there is no problem on the item itself.
*Due to low product stock, there is a possibility of stock shortage.

-The ED17 bogie was replaced with a unique one (HT62) to reduce the axle load for the Iida Line. Above all, Unit 1 had a unique appearance due to the additional one level of ventilation openings on the side. The position of the bogie frame and the production nameplate are slightly different from those of Unit 2/3.
-This product is a prototype of the end of working until the 1975's.
* In modeling, the idle wheels in the actual vehicle are used as the drive wheels.

-License plate installation:
Polish the letters and edges with a paper file of about 600.
Attach the mounting position with a rubber adhesive or the like, referring to the diagram in the manual.

-The hole at the front end on the roof is for additional mounting of a commercially available whistle (optional).

Item Size/Weight : 15.8 x 10.7 x 4.5 cm / 145g