Product Description
[Vehicle]
System - 7000/7300, the group boasts a maximum power in Hankyu 6000 series, 8000/8300,
混結 system and also of 9000/9300, is active in vehicles from the Almighty to express normal.
- Until the year 7000 is manufactured (1988) from the year 1988 (1980) 1980 for Kobe and Takarazuka Line,
174 tanks (16 stations 8, two 6-unit, one 4-unit, eight for two consecutive, 12 other tanks) tanks 38, the Takarazuka Line to Kobe Line
(Three 8 stations, one 6-unit, four consecutive 2) has been enrolled.
- System is manufactured until year 7300 (originally 2003) from the year 1989 (1982) 1982 for the Kyoto Line,
83 tanks (6 8 stations, 3 +6 for two consecutive, two consecutive five, a car tanks rest) is active in.
※ As of April 2008
[Features]
- Coating of the body, when reproduction of the era appeared [color Maroon.
- The body, because we have based on the vehicle was manufactured after 1985 of the 7300 Kyoto Line system, there is a different place and some vehicle.
• The driver's cabin of the car behind the first part, you will not have a small window and type.
-Type on the roof will be no interval of Kurakise ventilator has narrowed slightly, to end the car.
Indicator and headlight and passing through (when advancing LED / yellow) tail light (when the reverse LED / red),
(With ON / OFF switch in the room) will be standard lighting.
※ top car for two sets of tanks Zoketsu 4091 [7100/7400] Since the middle portion will be trapped,
Current collector plate and are not equipped with the light unit.
- Peripheral equipment under the floor of a different shape in the series resistor 7000 and 7300, the selection formula by different parts
Will be.
- Dummy coupler (No. 4089) of the [7100/7400], the shape of each basic set routes and vehicles
For (continuous self-dense dense Wren) are different, and will be serviced by a different selection formula.
[Specifications]
- The front window wiper, you will be represented at the silver print.
- Curtain and curtain type direction, can be selected from the sticker that comes with your favorite stuff destination front, side
You (will not be lit).
- Company emblem on the side of each vehicle and the transfer formula, you can select the old and new.
- Number front, side, from your favorite (new manufacture specialized products expression / transcription) mark attached wheel
You can choose things.
- Powered vehicle, we will adopt the standard model of type 2 motor finished product. In addition, for motor vehicle
Floor equipment parts will be divided into left and right expression.
- Fuse box and the antenna is attached and another by the user of the equipment like roof
You.
- The consolidation of the drawbar between the top car is adopted, two tanks set into the top car for Zoketsu (No. 4091)
Will be attached.
- The nature of the product, to a telescoping body mount coupler does not correspond to the first third-party (
Car except the front side).
- The skirt portion of the front side of the top car, TN telescopic body mount coupler made by Tomix
(Ren dense NO.0332 /) can be installed (decomposition processing is needed).
- For use in sharing the parts, there is a different place and some vehicle.
- The main body of material ... Resin: ABS, Case: PP
[Accessories]
Stickers - (S-4089): 2
- Mark vehicles (M-4098): sheet 1, (M-4059): one
- Rooftop equipment (4059-11 / antenna, fuse box): 4 months from the same system and the Hankyu 8000 ※, gray molded parts
- (Plank) A small: from the same system and the system 2800 8000 Hankyu Hankyu ※ two, Maroon color molded parts
- Floor equipment (for system 4089A-0/7000): general-purpose products 2 months ※, gray molded parts
- Floor equipment (for system 4089A-3/7300): general-purpose products 2 months ※, gray molded parts
- General-purpose dummy coupler: a general-purpose products months ※, gray molded parts
[Sold separately]
- A current collector plate GM · (a pair No.98-2/4 months)
※ It is needed when using indoor lighting unit. Required number is 3 months.
- (Pack of 0737/6, or pieces No.0733 / 1) white room lighting unit LC TOMIX ·
[Tools needed]
- Cutter: cut out parts accessories, stickers
- Nipper: excision of parts included
- Tweezers: When mounting parts
- Mat cutter: for work
- Pen transcription: transcription of the vehicle mark
- Rubber-based adhesive: used when the parts have come loose when mounting
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 30.6 x 21.7 x 3 cm / 648g
Product Specifications
- Item code
- 4098
- JAN code
- 4946950409806
Purchase Information
This item is limited to 6 per household.