Product Description

[Vehicle explanation]
- Kintetsu 22000-based ACE has emerged in 1992 as a general-purpose express an alternative to the 10400-based or 11400-based. Significantly along with the model change appearance from 12400 system [Sanika] series, the VVVF inverter control for the first time it is adopted as a limited express vehicle, maximum speed is ordered and 130km / h. There are two car train and four-car train, and consolidated the operation of the 12200-based snack car, it is also made consolidated operation of the state-of-the-art 22600-based Ace.

[Product Specifications]
- Headlight tail light lights up (with off switch)
※ No.4023 of light can not be turned off on the structure.
- Kintetsu 22600-based Ace launched in a total of re-production.
- To meet the customer's voice, four-car train (without power) set a new setting than this.
- The structure of the product, it does not correspond to the third-party body mount telescopic coupler (corresponding to only the first part).
- Consolidation among the top car will be using the swing drawbar.
- Car number will be the selection formula by the vehicle mark Inreta.
- Separate parts, such as rooftop equipment will be mounted by the customer.

[Vehicle Guide]
- Kintetsu 22000-based ACE is a general-purpose express vehicle that appeared in 1992 for the purpose of replacement of 10400-based or 11400-based.
- Significantly along with the model change appearance from 12400 system [Sanika] series, the first time adopted a VVVF inverter control as a limited express vehicle, maximum speed has become a 130km / h.
- 2-car train and four-car train is present, both have become all cars electric vehicles.

[Product Features]
- Product commercialized later secondary car prototype.
- Rooftop equipment of the radio antenna, fuse box, telephone antenna is user-installable in a different part.
- Wife face door through representation on the vehicle body.
- Carriage is fitted with a dedicated KD304.
- Under the floor equipment is using a dedicated parts (V · W).
- Consolidation among the top car is used to replace the swing drawbar that comes from the dummy coupler.
- Already wearing the cross sheet parts (gray) in the room. (Except motor vehicle)
- This product corresponds to the current collector.
- Some Upon modeled there is a vehicle with the different locations. Please note.

[Equipment]
- Headlights: [standard] yellow LED (with off switch [I excluding the motor vehicle])
- Tail lights: [standard] red LED (with off switch [I excluding the motor vehicle])
- Dolly: [standard] collector correspondence
- Swing drawbar: [comes]
- Pantograph: [standard] repair, replacement parts: PT48 (No.5804)
- Stickers: [comes]
- Vehicle mark: [accessories] selection formula by the vehicle mark

[Settings such as type, destination, service number]
- Sticker selection formula

[Organization Example]
← Namba, Kyoto Kintetsu Nagoya and Osaka Kashikojima →
- No.4023
Mo 22100 (T) + mode 22200Tasu model 22300 (M) + Mo 22400
- No.4024
Mo 22100 (M) + Mo 22400
- No.4025
Mo 22100 (T) + Mo 22400
- No.4211
Mo 22100 (T) + mode 22200Tasu model 22300 (T) + Mo 22400

[Optional parts (including third-party products)
- GM collector plate for TR210 (No.98-4 / 4 undoubling ON)
※ required number: 4023 = 1 bisect, 4024/4025 = unnecessary, 4211 = 2 undoubling
- TOMIX TN coupler JC-25 (Mitsuren type [electric with communication] Grey)
※ correspondence only cab side.
※ Mounting Remove the dummy coupler from the skirt base.
- TOMIX indoor lighting unit LC white narrow (No.0733 / 1 pcs, or 0737/6 pieces) corresponding
※ fixed to the hook of the ceiling surface of the inner body.
- TOMIX indoor lighting unit LC bulb color narrow (No.0734 / 1 pcs, or 0738/6 pieces) corresponding
※ fixed to the hook of the ceiling surface of the inner body.

[Necessary tool]
- Cutter (excision of parts included sticker)
- Tweezers (at the time of installation of accessory parts sticker)
- Nipper (cut-out of parts included)
- Cutter mat (for work)
- Rubber-based adhesive (for parts mounting)

[More]
- Main Material body of product: ABS Package: PP package sleeve / jacket: Paper


- Kintetsu commercialization already licensed



Item Size/Weight : 20.2 x 18.8 x 3 cm / 377g

Product Specifications

Item series

Pre-Colored Completed , Electric Car

Organization

Kinki Nippon Railway (Kintetsu Corporation)

Region

Kansai , Chubu

Item code

4211

JAN code

4946950421105

Purchase Information