Product Description

- Update car specification car ventilator gon initial Seibu Series 2000
- Square on the roof ventilator features (conventional ventilator glove Round) of
Modeling the finished product, the organization!
- The destination-type will reproduce the appearance of the current display was LED.

[Remarks Vehicle]
- Groups that have been produced as a final increase in the car 備車 initial Seibu Series 2000 is the roof ventilator
In the square, except that the curtain is disposed laterally from the time of appearance, the wiper is expanded toward the passenger seat
There are features such as. LED-type destination into view, now that the updated Panragurafu Singh
In addition to the guru pantograph arm, into the side car number plate has been made, other 2000-series
I also observed a change in appearance as compared to the initial vehicle.

[Product Description]
- Square on the roof ventilator features (conventional ventilator glove Round) specific organization
Commercialized in the finished product model, the.
- In the front window, the wiper reproduced in print, which is also expanded passenger side.
- Represented by the figure number printed on the side of the body has become the plate type.
- Type-destination reproduce the appearance of the display and now a LED.
- Pending permission commercialization Seibu Railway Co., Ltd.
Products - The current prototype form 2013 attached symbol, with a single arm pantograph
Commercialization.
- Making a new roof equipped with a ventilator square, plate and wiper that has been expanded to passenger side
Reproduce the features of the car, such as the side of the equation number.
- Radio antenna, ventilator, the roof is already mounting fuse box. I enjoy immediately after purchase
Appreciated.
- Through door face wife wife expressed printed on glass surface.
- In the same specifications as the initial car on sale 2000 series Seibu existing underfloor equipment and new underfloor A · C (Generic
Mounting parts for Tokyu 8500 series)
- Printed on the top side of the car symbol.
- Connection between the top car using the swing drawbar that comes with the set hematopoietic.
- There is a place different from the vehicle body part in relation to the use of existing Upon into the model.
Please note.

[Standard]
- Head Light: LED yellow (with switch off)
- Tail Light: LED red (with switch off)
- Carriage support: the collector
- Pantograph: repair, replacement parts: PT71C (No.5809)
- Car number printed
- Comes with swing drawbar

[For optional]
- Sticker

[Destination-type]
- (Front print only) Seibushinjuku-express

[Sold separately]
- GM: TR200 collector plate for required number / (pcs No.98-3/4): bisect 4499 = 3, 4500 = unnecessary
- GM: destination / support Seibu Series 2000 new sticker display (included undoubling No.6813/10)
- TOMIX: corresponding (dense gray type communication [with Ren electric]) side only cab / TN coupler JC-25.
※ Remove the mounting base from the dummy coupler skirt.
- TOMIX: (0737 pcs / 6, or pieces No.0733 / 1) narrow white room lighting unit width LC
※ fixed to the ceiling of the inner surface of the nail body.
- TOMIX: (0738 pcs / 6, or pieces No.0734 / 1) LC indoor lighting unit bulb color narrow width
※ fixed to the ceiling of the inner surface of the nail body.



Item Size/Weight : 20.2 x 11.9 x 3 cm / 177g

Product Specifications

Item series

Pre-Colored Completed , Electric Car

Organization

Seibu Railway

Region

Kanto

Item code

4500

JAN code

4946950450006

Purchase Information