Product Description
- New release cab back parts for various locomotive! !
- Locomotive who are leading the various train, to a variety of activity.
- Indoor cab back parts to reproduce the brave figure more feeling basis will be released new.
- Installation is quite easy.
- You can reproduce the back equipment as seen from the front just stick to the light-shielding parts.
- Parts and has been cut by a laser, we are easy to paste.
- Please make the means your existing grade up of the vehicle.
- Contents: EF81 cab 2 輛分, ED79 cab 1 輛分, DD51 SG room seal, DD51 SG window for smoke seal, SG room representation acrylic parts 2 輛分
- Was stuck Tsukekata (EF81):
(1) Remove the cab of parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) I will return the beam finished parts to the original position. You are able to make classification at the 1-position side and the second place side, please be careful to mounting. (The shorter of the high-voltage line is first place side)
(4) It is a complete re-assembled to restore.
- Was stuck Tsukekata (ED79):
(1) Remove the cab of parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) I will return the beam finished parts to the original position. You are able to make classification at the 1-position side and the second place side, please be careful to mounting. (The shorter of the high-voltage line is first place side)
(4) It is a complete re-assembled to restore.
- Was stuck Tsukekata (DD51):
※ Note: You can not be used in conjunction with auxiliary weight.
(1) I will remove the cab around the locomotive.
(2) seal and peel off carefully, you can paste it in as wind in SG room surface. And paste the double-sided tape on the bottom, you can stick it to escape the switch. SG interior of the curved portion of silver, you will further realize basis when paint the other in black.
(3) smoke seal and peel off carefully, and stick it on the SG chamber side window back.
(4) It is a complete re-assembled to restore.
※ If is SG side that is one step higher to see the cab from the side.
- Use Material: resin adhesive sheet
※ We produced a vehicle to reference but there is a part that is different from the actual vehicle.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 12.5 x 7 x 0.5 cm / 4g
Product Specifications
- Item code
- 10286
- JAN code
- 4582342842860
Purchase Information
This item is limited to 24 per household.