Product Description

- Such as grasslands and grassland representation of the model railway, diorama, architectural models, is the perfect flocking mat scene production and product display.

[Product Features]
- Scenery mat that has been produced by the electrostatic flocking processing, use a fabric blend of rayon and nylon flocked pile (short fiber), has adopted a special paper which has been subjected to [wrinkled] is the flocking of the base paper. There is a stretch by [wrinkled], makes it easier to fit in, such as uneven surface and stretch gently paper use the finger. Flocking pile is bonded with a water-soluble adhesive, you can get rid of easily flocked pile by painting a small amount of water to the flocked surface when creating a road and squares.
- Of Hiroyuki TSUGAWA scenery mat can be utilized to model and display, photography background various applications, such as paper in the idea soon.

[Guidance]
- Scene for flocked mat of Yoko TSUGAWA price, color, will be renewed released as a new [scenery mat] review the size.
- Product size is three sizes SML, color [spring of green] two colors in the autumn of green.
- Package of S size - hemorrhoids mount entry that describes how to use a single product to the bag with a header.
- M size package bag with a header the product on a roll state, with papers describe.
- L size is packaged in a header Mufukuro in a roll state, with papers describe.

[Main Features]
- Use a special paper which has been subjected to [wrinkled] to flocking of the base paper. Because it is a paper which has a stretch easily be fit to uneven surface or the like, so we use a water-soluble adhesive, such as when you make your way, get rid of easily flocked part by painting a small amount of water to the flocked surface can do.
- Scenery mat of Hiroyuki TSUGAWA is Quirky flocking mat with other companies.

[size]
- Size L: 980mm × 730mm
- Size M: 490mm × 720mm
- Size S: 240mm × 350mm

* For the convenience of the cut, the size there is a slight variation.
* Cutting: scissors cutter knife, etc.
* Adhesive: woodworking bond spray glue and rubber-based adhesive
* Mat Styrofoam Styrofoam if used dissolve the spray glue and rubber-based adhesive When you attach directly to the, please note that it may be deformed.
* If the flocked pile fall will be less likely to fall and spraying the hair spray to flocked surface. Please perform the procedure so that there is no masking the hair spray rail and structure on the layout.

[Scenery Using the mat]
- 1. Turn off the scenery mat with a pair of scissors or a cutter knife rotary cutter to the size you need.
※ cut a little bigger for the location where you want to use, it finishes to clean and cut out the extra surface after bonding dry. In addition, to create a pattern, you can work efficiently and cut while addressed to the mat.
- 2. The adhesive Please select the location where you want to use. Woodworking bond rubber-based adhesive to the narrow surface, please use the spray glue, woodworking bond double-sided tape on the broad face.
- 3.
(A) scenery mat temporarily placed the mat was cut to where the stick, and then check the shape and size.
(B) coating an adhesive mat in half of the spring sumo tournament in a broad face, that on the place mat, and temporarily fixing pin or the like. So as not to shift position in the pin or the like until the adhesive put the rest of the mat coating the adhesive on the surface of the remaining half is dry and temporarily fixed. Adhesive Unplug the pin If you have dry out.
(C) coating the adhesive to the entire place to put in a narrow surface, place the mat on top of the adhesive, and temporarily fixed with a pin until the adhesive dries.
(D) after the glue dried, the extra surface cut in such cutter, finish.
- Against 4. uneven surface, please perform the work in reference to the following method when you can not cope with normal How to paste.

- Uneven surface processing method:
(1) product has adopted a special paper which has been subjected to [wrinkled].
(2) If you want to use the convex surface is to use your finger from the back side, and stretches to the extending direction of the paper little by little.
(3) If you want to use the concave surface is to use your finger from the flocked surface, it stretches to the extending direction of the paper little by little.
(4) When it's form, and attach while according to the uneven surface.
※ of uneven surface height, in this process by the depth may not be able to handle.
Please perform the work to stretch a little forced to stretch and so cut paper ※.

- 5. Since the adhesion of the flocking pile uses a water-soluble adhesive, such as when you make your way, you can get rid of easily flocked pile that paint the water in flocked surface.

- The way of how to make:
※ work is done after you put a mat.
(1) Prepare the water and a brush (brush).
(2) to the flocked surface to the location where you want to make the road will continue to put the water with a brush.
(3) Remove the flocking pile of place wearing the water. (Please do not extra touch until the water dries marked with part)
(4) coating an adhesive to the part that was removed flocking pile, it is completion of road seeded powder.



Item Size/Weight : 39.3 x 26.7 x 0.8 cm / 45g

Product Specifications

Item series

Diorama Parts

Item code

SM-5

JAN code

4957265112152

Purchase Information