This item is limited to 1 per household.
-Rooftop equipment parts included in JR113 / 115 trains will be commercialized as unpainted parts.
-Elaborate modeling of real rooftop parts down to the smallest details.
-In addition, there are convenient mounting feet when installing on the roof. (Excluding some parts)
-Since the gate is on the mounting foot of the part, cutting the gate after painting does not impair the painting or appearance of the part. (Excluding some parts)
-The parts are made of ABS resin, so they can be painted and bonded.
-It can be used not only for repair but also as an upgrade part of finished products and kits.
* Some parts differ from actual vehicles in modeling. Please note.
[Product set configuration]
・ Rooftop equipment parts (signal flame tube, antenna, [suburban type]) runner × 4
・ Instruction manual × 1
[Recorded content per runner]
-1: Signal flame tube (low)
-2: Signal flame tube (high, body thickness)
-3: Signal flame tube (high)
-4: Signal flame tube (low body thickness)
-5: Signal flame tube (high, body thickness, with cover)
-6: Train radio antenna (with square pedestal for slope)
-7: Whistle cover
( This is a machine translation. Please allow for possible misinterpretations in the text. )