-A power pack that allows you to easily drive a vehicle even without an AC power source.
[Characteristic]
-It is hard to stop even in slow running and the LED lights up brightly.
-Can be turned on when stopped.
-Two output connectors are provided for KATO and TOMIX.
-Due to the PWM method, heat loss is small and the battery has a long life.
-An optional AC adapter that can be used with AC100V.
[What is PWM (plus width modulation)?]
-A control method to change the motor speed and lamp brightness. The voltage (12V or 15V) is constant and the pulse width (duty ratio) is changed from 0 to 100%.
-Widely used for home appliances.
[specification]
-Vehicle output: PWM 12V 2-100% 0.9A
-Power supply: 8 AA batteries
-Operation unit: speed adjustment knob with power switch / traveling direction switch
-Display: Power indicator (lit green when energized / extinguished during overcurrent)
-Connection: KATO connector 1 / TOMIX connector 1
-Dimensions (mm): L150 x W100 x H40 (excluding protrusions)
-Weight (g): approx. 360 (without batteries)
-Other: No point output
* Batteries are not included
( This is a machine translation. Please allow for possible misinterpretations in the text. )