-7 Equipped with a popular indoor light that can store electricity (significantly reduces flickering). (Compatible with wide range of popon detta and TOMIX products)
-We will add a white color located between the existing bluish white and yellowish white.
-Specifications other than color are the same as existing products.
[how to use]
-Attach the attached spring to the board and attach it to the vehicle body.
-Attach the adapter to the part that hits the vehicle body column.
*The adapter is used only for vehicles other than those made by Popondetta.
*Cut the board at a place where it can be cut according to the length of the vehicle.
[About changeover switch]
-The strength of the light source can be switched with the switch on the board
-Mode S: Normal mode considering the illuminance of the actual vehicle. Large amount of electricity storage
-Mode H: Brightness priority high illumination mode. Small amount of electricity storage
*The initial setting is Mode S (Standard).
*Although it is compatible with TOMIX vehicles, some vehicles and models cannot be installed.
*Cannot be installed on tram/car interior lights.
-Number of LEDs: Equipped with 15.
[Note]
-Please use this product at 12V or less.
-Since it is an N gauge room light, it is strictly prohibited to use it for other purposes.
[Package size]
-1 bottle: Approx. 19 mm x 183 mm x 15 mm
-7 pieces: Approx. 27 mm x 183 mm x 17 mm
*Specifications are as of the end of April 2020. Specifications may be changed during commercialization.
( This is a machine translation. Please allow for possible misinterpretations in the text. )