★ The dreamy MY layout is finally reached!
Subterain, easy layout production OK.
Besides, it is short time, light weight, and you can start over again.
This useful layout material, for the first time!
- Subterain makes it easy to make a gradient!
- Ink line starter
It is a core material for rails and roads, can bend freely, easily and accurately%
You can make a gradient.
※ Since only the one of the same shape as shown in the picture is included, mainly with a riser
Together we will make a gradient.
- The height at which the crossover is possible, considering the height of the track bed and pantograph,
At least 5 cm for N gauge and minimum 10 cm for HO gauge are required.
- Example of using ink line starter
As an example, when creating a 3% gradient three-dimensional intersection with N gauge, add 3% ink line,
I will use three 3/4 inch risers, two ascending and descending. When purchasing,
One of the lowest (ST 1415) 3% gradient ink line enters one, (ST 1414) 3/4 inch riser
I need two pieces of 4 bottles.
- Specification
· Length: 61.0 cm
· Height: 2.5 cm
Width: 6.3 cm
· Contents: 4 pcs (same shape)
· Conformity riser: 1 inch riser
( This is a machine translation. Please allow for possible misinterpretations in the text. )