Product Description

- [Shimakaze] New release of third organization for interior parts! !
- Boasts luxurious amenities Kintetsu 50 000 system [Shimakaze]. Third organization of the increase 備車 is different from Japanese-style room and a cafe car chair.
- The interior parts to reproduce the interior will be released new. Private room inside, as well as features a cafe car chair, and reproduce the table.
- In addition, it is easy to stick to cut by a laser even cutting sheet back of the table or floor and the like of the seat cars. Please utilize all means your existing grade-up of the vehicle.

[Attaching]
- 1 This is the car Car 2 and 5 car 6 car common.
- (2) to use the part of, and paste it into the floor.
- (4) paste the rear part of the seat in the parts of.
- Paste the seat cover (8) to each seat.
- Paste the partition plate of the deck in the parts of (1).

- Indoor wall or the like representation sheet is separated by very sharp cutter or the like, and paste with double-sided tape or the like to the appropriate part. part molded ribs or the like is an obstacle, it finishes to clean the hull is cut in the form to avoid the relevant part. Inner wall, door seal and paste as it is removed from the mount. We are the processed by laser cutting, but insufficient part part of cutting (there is also place of actual alignment) Disconnect and traced lightly with a cutter or the like. Please refer to the process as a guide one day both because it is a fine work.
※ We have produced a vehicle to reference but there is a part that is different from the actual vehicle. Please note. Also, like responsibility we can not assume damage during processing.
- Use Material: paper cutting sheet



Item Size/Weight : 16.6 x 10 x 0.5 cm / 15g

Product Specifications

Item series

Parts

Organization

Kinki Nippon Railway (Kintetsu Corporation)

Region

Kansai , Chubu

Item code

10192

JAN code

4582342841924

Purchase Information