[Vehicle Guide]
- Tobu 6050 system in a 2 door cicada cross seat vehicle that appeared by the body update of the 6000 series, 2-car train the 22 from 1985 to 1986, has appeared by the update. Full newbuildings organized one organized in 1985 from the vehicle in the middle of the update is insufficient, 1 organized in 1986, in 1988 Zo備 (2 organization of these transferable to Yagan Railway) is, then 7 organize and field 1 knitting Zo備 of rock railway for, in 1990 has been manufacturing one organized in Aizu railway for.
- Full newbuildings organization is characterized by that the truck is in the SU Minden type truck. Because in 1996 to improve the efficiency of Zokaiyui, coupler of top portion, are exchanged from the automatic coupler to the electrical coupler with tight coupler, received jumper plug has been attached to the front left side of the removal It has been.
- Will be from the timetable revision of March 2001 is operated in a normal train of Nikko Line, defrost for pantograph it has been expanded to 5 organization. In addition, it defrosting pantograph is expanded with additional fully newbuildings vehicle 2 organized in accordance with the appearance of the interval fast in 2006.
[Notices]
※ Tobu commercialization already licensed
※ Product of the part number 4556,4557,4558 will be discontinued products.
[Overview]
- Equipped with a flywheel with coreless motor power unit of the new design. Smooth and powerful driving performance!
- Once the Tobu 6050 system that was launched in the painted kit, renewal modeled in a new mold.
- 30000 system of Isesaki, 10000-based, you can enjoy side by side along with the 10030 system.
- Reproduce the different mounting carriage in newly built cars and update car.
- In addition to the head-tail light, it expresses lights up (during forward)
- Adds to the lineup the popularity of defrosting with Panta organization.
- Destination direction curtain will provide a separately sold options.
[Product Features]
- Commercialized in 2012 the figure was changed to the new logo to the prototype.
- Update car, reproduce the difference of the truck by the newly built cars.
- Front through canopy user installation.
- On the roof radio antenna, cooler, ventilator, fuse box is mounted already in a different part.
- Wife surface glass omitted.
- Wife face door through representation on the vehicle body.
- Dolly existing FS356 (update car) and FS539 (newbuildings car), equipped with a FS396 (newbuildings car).
- Under the floor equipment is new production under the floor equipment for Kuha, For Mohd attached to existing new B.
- Light unit is a non-see-through structure.
- The top car side print the new logo.
- Consolidation among the top car is using the swing drawbar.
- Already wearing the cross sheet parts (engine color) in the room. (Except motor vehicle)
- This product corresponds to the current collector.
- The top car of the light entering the basic set of intermediate non-lighting.
- There is a different part vehicle parts Upon modeled. Please note.
[Equipment]
- Headlights: Standard equipment [white LED (with off switch [excluding the motor vehicle])]
- Tail lights: standard equipment [red LED (with off switch [excluding the motor vehicle])]
- Carriage: standard equipment [collector corresponding]
- The power unit: None
- Swing drawbar: Accessory
- Pantograph: standard equipment [repair, replacement parts: PT48 (No.5804)]
- Sticker: correspond by sold separately
- Vehicle mark: None (car number printed)
[Settings such as type, destination, service number]
- Type: interval fast
- Destination: Asakusa
- Note: The side is omitted
[set content]
- Moha 6155Tasu Kuha 6255
[Optional parts (including third-party products)
- GM: sticker Tobu 6050 system corresponding destination display sticker (No.6825 / 4 bisect recording)
- TOMIX: TN coupler JC-25 (Mitsuren type [power with continuous] Grey)
※ corresponding only cab side.
※ mounting Remove the dummy coupler from the skirt base.
- TOMIX: indoor lighting unit LC white narrow (No.0733 / 1 pcs, or 0737/6 pieces) corresponding
※ fixed with double-sided tape on the ceiling surface of the body inside.
- TOMIX: indoor lighting unit LC bulb color narrow (No.0734 / 1 pcs, or 0738/6 pieces) corresponding
※ fixed with double-sided tape on the ceiling surface of the body inside.
[Necessary tool]
- Tweezers (at the time of mounting parts)
- Rubber-based adhesive (for parts mounting)
[More]
- The main material of the product
Body: ABS
Package: PP
Package sleeve / jacket: Paper
( This is a machine translation. Please allow for possible misinterpretations in the text. )