Product Description

-Multi-type corresponding to each company's case size
-Stores up to 12 cars of 21m class

[Characteristic]
(1) Use the original case as it is
-The vertical and horizontal width can be adjusted at the perforation for adjusting the size of PE foam according to the case size of each company.

(2) Up to 12 cars can be stored up to 21m class
* Vehicle length: 141mm, height up to 29mm
-Depending on the shape of the vehicle, it may not be stored.
-If the coupler part interferes with a trolley mount coupler, replace it with a body mount coupler and store it.
-Store heavy vehicles such as motor vehicles in the lower part.
-Since both sides of the storage section are marked, please use them separately. The detached part cannot be restored.

-Slightly tight design with respect to the case.
-If it is difficult to place the PE foam in the case, remove the PE foam from the vehicle compartment and place it in the case.
-Slight deflection will occur, but will be resolved by storing the vehicle.

[specification]
-Product dimensions: 300 (294) long × 204 (198) wide × 20mm thick
-Vehicle storage: 29 x height 141mm
* The size in parentheses is the size after adjustment. Some errors may occur in the dimensions.

[please note]
-The target age of this product is over 14 years old.
-Open the case once a month and avoid long-term storage in a sealed state.
-Instant lettering and decals may deteriorate even after short-term storage.
-Depending on the shape of the vehicle, it may not be stored as it is.
(Even for 21m class vehicles, the vehicle length exceeds 141mm and the vehicle height exceeds 29mm)
-Bottom cover is not included. Use the one that came with the original case.
-When processing this product using a cutter or scissors, be careful not to get injured.
-This product is for storage. Not suitable for transportation.


Item Size/Weight : 30.6 x 21.2 x 4.2 cm / 178g

Product Specifications

Item series

Storage Articles

Item code

TU-505A

JAN code

4580331166089

Purchase Information