Product Description
Paper sleeve was changed once again common Manufactured from August ※ 2011.
- Kintetsu 5200 series, 1988 (1988) and has emerged as a vehicle for groups to express.
Mainly because of the operation of trains stop less frequently, small casement width 1300mm
The body uses a 3 door, seats and comfort to ensure that cross-sheet automatic conversion to all
I pursued. The partitions on each side of the bed and out again when the operation is only used as a car body
And fold-flat seat can be provided.
- The window uses a curved glass front, 520 to 208F and then vertically through the door window glass
System 0, 5209F auxiliary power unit employing SIV, the 5209 series 5210F, additional port
5211 has been identified as a system employing a dolly Rusutaresu 5211F ~ 5213F.
- Has been active mainly in the direction of long-distance trains connecting Osaka and Nagoya and Ise today.
- Products [5201F] ~ [5208F] and a prototype will be.
- The two top cars [5100], [5150] is real and without the odor of toilet facilities on each roof
Will be reproduced as a car.
- Headlights and taillights will be illuminated together. You can operate the switch in the room
Can be more off.
- The tail lights will illuminate yellow when the forward pass as indicators of both left and right.
- Equipment to produce a new floor is dedicated products will be adopted.
- The seating area will reproduce the gray cloth seats. (Excluding motor vehicles)
- Dolly dolly KD71 (Kintetsu for Series 12 200) as the inverse of the type KD301
The new production will be adopted.
- First car I Uehonmachi Nagoya (5100) attached to the front hood through the dedicated products and new production
Will be adopted.
- The panoramic cab of the front glass, the wiper will be reproduced in print.
- Pantograph Pantograph is the type of cross-PT48 conventional products (No.80-4) was installed
The.
- Of rooftop equipment, antennas, and will put another fuse box, remove the roof open
Plug each component into the hole with.
- The skirt of the car top, TN telescopic body mount coupler made TOMIX (No.03
32) can be mounted. In addition, the process requires disassembly of the coupler.
- Vehicle rear hitch and top middle of the car, the coupler is not compatible with other manufacturers parts.
- The top side of the car [VVVF] logo will be printed.
- Front, side curtain destination direction, with a cutter knife to cut your favorite content from the included sticker
Issued than the notation be attached.
Will not be lit.
- Front, side number, marked vehicles provided (new production for exclusive expression / transcription) of the desired
Rubbing the contents of the notation.
- The hood mounting adhesive penetration is required. Please use a commercially available rubber-based adhesive.
- Power unit, we adopted two types of motor Completed standard model. In addition, the power
Car parts for equipment floor is divided into left and right expression.
- Accessories: Stickers (S-1041A): two stickers (S-1041B): two
Mark vehicles (M-4078): New Parts Equipment products ※ one roof: Three (22000 Kintetsu
For the system) through Hood: 1 (New / Special molded gray) ※ New Products
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Copyright Kintetsu Corporation
Item Size/Weight : 20.2 x 18.8 x 3 cm / 416g
Product Specifications
- Item code
- 4078
- JAN code
- 4946950407802
Purchase Information
This item is limited to 6 per household.