Product Description

The Yamato from the Ship NEXT series comes in a special edition with easy-to-apply wooden deck stickers!

This series features a snap-fit design that requires no glue, setting it apart from conventional kits.
This significantly lowers the barrier to entry for ship modeling, allowing you to easily enjoy creating realistic results.

The product is modeled after the final appearance of the ship during Operation Ten-Go in April 1945.
Compared to the ship used in Operation Sho-Go 1 in 1944, this version is characterized by the addition of triple machine guns on both the port and starboard sides, and the removal of the antenna masts at the stern.

[Hull/Bottom of the ship]
The hull is split into left and right halves, divided at the waterline.
- It is molded in a special gray color that mimics the battleship gray used at the Kure Naval Arsenal.
- To depict the numerous portholes as being closed, dedicated parts were created: unclosed windows were recessed, and closed windows were raised, resulting in a highly detailed and distinct reproduction.
- The external electrical wiring attached to the side of the hull is accurately depicted, including the fastening points.
- The hull bottom is made from a single piece using slide molding technology, eliminating the need for seam treatment.
The bulbous bow at the front of the ship is realistically reproduced with a three-dimensional design.
- The rudder is a three-dimensional, angular shape, different from that of the third ship, Shinano.
The rudder surface features a highly detailed design that even depicts the seams of the steel plates.

[Main gun]
The main guns can be elevated and rotated.
- Achieves both a minimal number of parts and realistic sculpting.
The 46cm main gun barrel is positioned in an open state using a slide mold.
- To recreate the additional machine gun mounts on the roofs of the No. 2 and No. 3 main guns, dedicated parts were prepared for both the main gun roofs and the machine gun mounts.
The secondary guns are rotatable, and the barrels and turrets are integrated into a single, one-piece structure.

[bridge]
- The bridge uses a split and sliding mold to minimize the number of seams between parts, and the parts are integrated into a single unit.
The Type 22 radars located on both sides of the bridge are specially designed parts to recreate their relocated appearance.
The 15-meter rangefinder and compass rose are designed to be rotatable.
- A troop waiting area and an enlarged signal station deck are provided as dedicated parts behind the bridge.

[Chimneys and masts]
The chimney is a left-and-right combination design, and the steam exhaust pipe, whistle pipe, and even the monkey ladder are all represented as a single piece.
- The cap portion (grille) at the top is hollow, creating a very realistic and sense of depth.
The mast has a two-piece structure and was designed to integrate the Type 13 radar that was installed during this period.

[Carriage-based aircraft]
- Two types of carrier-based aircraft are included, each featuring a special dark green color part.
- One Type 0 (three-seat) seaplane reconnaissance aircraft and one Type 0 observation aircraft.
- Panel lines are recessed, and the propellers are integrated with the fuselage using a slide mold for precise detailing.

[Wooden Deck Stickers]
These are custom parts specifically developed to create an even more precise 1/700 scale snap-fit model of the Imperial Japanese Navy battleship Yamato. By simply applying two stickers, you can easily and instantly enhance the overall sense of weight and realism of your model.
The wood grain pattern (in the direction of the centerline) on the wooden deck decals is precisely reproduced down to the smallest detail so that it is clearly visible even at 1/700 scale.
- Faithfully reproduces the texture of a real wooden deck. The color tones of the deck surface are emphasized, creating a more realistic atmosphere.
- To minimize any unevenness when applying the sticker, the sticker thickness has been designed to be as minimal as possible.
- You can easily add detail without compromising the ease of assembly provided by the kit's original snap-fit design.
- The deck has precisely cut-out assembly holes of various sizes, as well as mounting holes for small parts. It can be attached perfectly without any troublesome additional processing.
The wooden deck decals have a yellowish tint.

- Includes pre-cut stickers with excellent adhesion and flexibility for easy detail coloring!
- Includes details such as the waterproof canvas on the main and secondary guns, the walkway behind the No. 3 main gun, the naval ensign, and the Hinomaru (Japanese flag) markings on the carrier-based aircraft.
- Includes the banners of "Non-Reason, Law, Authority, Heaven," the Kikusui mark next to the chimney, and the flag of Lieutenant General Seiichi Ito, the last commanding officer.

- A black, understated, linear base is included for displaying the finished product!
- For users seeking greater precision, we have included adhesive bonus parts.
Bonus parts include 78 machine gun ammunition boxes, mast supports, and antenna supports for the secondary gun roof.

The box art, created by Yoshiyuki Takani, depicts the battleship Yamato sailing at high speed under a clear sky.

Product Specifications

Item series

1/700 Fune Next

Country

Japan

Item code

461410

JAN code

4968728461410

Purchase Information